Read Sony KF-E42A10 / KF-E50A10 (serv.man7) Service Manual online
13
KF-E42A10/E50A10
KF-E42A10/E50A10
READING LAMP AND PANEL TIME
The BE_Micro menu of the Service Menu displays the current lamp and
panel time of a set.
panel time of a set.
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
One of the three Service Menu displays. (For more information
regarding the Service Menus, see
2-2. Accessing Service Adjustment Mode.)
regarding the Service Menus, see
2-2. Accessing Service Adjustment Mode.)
3. Press JUMP until the BE-Mircro service menu displays.
CONFIGRATION
00
SERVICE
CP18_COLOR_SYS
00
00A0
BE Micro
4. To read the Lamp time, press 4 to display the GW_SPECIAL
category and the LAMP_TIME item.
GW_SPECIAL
34
SERVICE
LAMP_TIME
02
00000014
BE Micro
The screen displays:
“Total LAMP TIME is 14 hours”
5. To read the Panel time, press 4 to display the PANEL_TIME item.
GW_SPECIAL
34
SERVICE
PANEL_TIME
01
00000014
BE Micro
The screen displays:
“Total PANEL TIME is 14 hours”
6. Do one of the following:
a. If you have replaced the lamp, proceed to “Resetting the Lamp
Time”.
b. If you have not replaced the lamp, turn off the set by pressing
POWER
RESETTING THE LAMP TIME
When replacing the lamp, use the following to reset the lamp time.
1. If the Self-Diagnostic screen is already displayed, proceed to step 4.
If not, Power off (Set to Standby mode).
2. Press DISPLAY
Channel
5
Sound Volume -
POWER
3. Press JUMP until the BE-Mircro service menu displays.
CONFIGRATION
00
SERVICE
CP18_COLOR_SYS
00
00A0
BE Micro
4. To access the Lamp reset, press 5 until the OPTION_E category
displays, and then press 1 until the LAMP item displays.
NOTE: If you pass the OPTION_E category, press 2 to go back
through the list.
through the list.
OPTION_E
20
SERVICE
LAMP
01
0014
BE Micro
5. To reset the Lamp time, press 3
MUTING
ENT to
write the change into memory.
OPTION_E
20
WRITE
LAMP
01
0014
BE Micro
WRITE
is momentarily displayed
6. To verify the Lamp has been reset press 5 until the GW_SPECIAL
category displays, and then press 1 until the LAMP_TIME item
displays.
displays.
GW_SPECIAL
34
SERVICE
LAMP_TIME
02
00000000
BE Micro
The screen displays:
“Total LAMP TIME is 0 hours”
NOTE: You cannot reset the Panel time with the Service menu.
EXITING SERVICE MODE
After completing the changes, exit service mode by turning off the set
using the Remote Commander or the power switch.
using the Remote Commander or the power switch.
NOTE: After exiting service mode wait 2 minutes before restarting
the set to allow the fans to shut down properly.
the set to allow the fans to shut down properly.
Click on the first or last page to see other KF-E42A10 / KF-E50A10 (serv.man7) service manuals if exist.