Read Sony KE-42M1 / KE-MV42A1 / KE-MV42M1 / KE-P42M1 Service Manual online
- 6 -
9) Check that the wires are correctly arranged and connected. Do not change the
distances between the parts and the printed circuit board. Check that the AC power
cord is not damaged. Keep heating parts away from lead wires and other parts.
10) Product safety indication : Some electrical circuits and devices have specific safety
characteristics. Therefore when replacing parts, use the same parts as originals.
Safety and protective function will be lost even if parts with higher voltage and wattage
capability are used.
11) Be sure to disconnect the AC power cord before servicing.
12) After servicing, check that the screws, parts, and wires are correctly installed. Also
check that the peripheral parts are not damaged.
2-2-2. Precautions for servicing electrostatic sensitive devices
Some semiconductors (such as ICs and FETs) are easily damaged by electrostatic.
These devices are called electrostatic sensitive devices (ESD).
The rate of electrostatic damage to devices can be decreased by observing the
following precautions.
1) Before handling semiconductors and assemblies, discharge electrostatic from your
body with an earth ground, or wear an antistatic band.
(Be sure to discharge electrostatic before turning on the power, to prevent electrical
shock
shock
)
2) After removing the ESD assembly, place it on an antistatic mat with aluminum foil to
avoid electrostatic charge.
3) Use only a ground-tip soldering iron to solder and unsolder the ESD.
4) Use only an antistatic soldering removal device for the ESD. General soldering
removal devices are non-antistatic. Using such non-antistatic devices will damage the
ESD.
Click on the first or last page to see other KE-42M1 / KE-MV42A1 / KE-MV42M1 / KE-P42M1 service manuals if exist.