Read Sony KDS-60R2000 Service Manual online
– 5 –
KDS-60R2000
RM-GD001
Overview of the TV buttons and indicators
Note
Make sure that the TV is completely switched off before unplugging the AC power cord. Unplugging the AC power cord while the
TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction.
TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction.
1
PROG +/-/
/
Å In TV mode: Selects the next (+) or previous
(-) channel.
Å In TV menu: Moves through the options up
(
) or down (
).
2
2
+/-/
/
Å In TV mode: Increases (+) or decreases (-) the
volume.
Å In TV menu: Moves through the options right
(
) or left (
).
3
/
– Input select/OK
Å In TV mode (page 20): Selects the input
source from equipment connected to the TV
jacks.
jacks.
Å In TV menu: Selects the menu or option, and
confirms the setting.
4
5
1
– On/standby indicator
Flashes in green when the light source is
preparing to turn on. Lights up in green when the
TV is switched on.
Lights up in red when the TV is in standby mode.
If the lamp cover or the lamp itself is not securely
attached, the red indicator will continue to flash
in intervals of three blinks at a time.
preparing to turn on. Lights up in green when the
TV is switched on.
Lights up in red when the TV is in standby mode.
If the lamp cover or the lamp itself is not securely
attached, the red indicator will continue to flash
in intervals of three blinks at a time.
6
– Timer indicator
Lights up in orange when the timer is set
(page 29).
(page 29).
7
– Lamp indicator
Flashes in red when the lamp for the light source
has burned out.
has burned out.
8
Remote control sensor
9
1
– Power
Switches the TV on or off.
Projection lamp
Your TV uses a projection lamp as its light source. As with
any lamp, it has lifespan and needs to be replaced when the
lamp indicator flashes or the screen becomes darker.
any lamp, it has lifespan and needs to be replaced when the
lamp indicator flashes or the screen becomes darker.
Notes
• After switching on your TV, it may take a while (1 minute
or less) before the picture appears.
When the projection lamp wears out, the screen goes dark.
When the projection lamp wears out, the screen goes dark.
• Replace the lamp with a new Sony XL-5100 replacement
lamp (not supplied). How to replace the lamp, see page 42.
Warning
The light emitted from the lamp is quite bright when your TV
is in use. To avoid eye discomfort or injury, do not look into
the light housing when the power is on.
is in use. To avoid eye discomfort or injury, do not look into
the light housing when the power is on.
Click on the first or last page to see other KDS-60R2000 service manuals if exist.