Read Sony KDS-50A2000 / KDS-55A2000 / KDS-60A2000 / KDS-60A2010 Service Manual online
– 5 –
KDS-50A2000/50A2010/55A2000/60A2000/60A2010
K
RM-YD010 RM-YD010 RM-YD010 RM-YD010 RM-YD010
7
Put the new lamp into its place.
Insert the new lamp by pressing the two parts firmly into place as shown
in the illustration. Make sure the lamp is securely mounted into the
compartment. Failure to do so may cause a fire or the screen to go dark.
Insert the new lamp by pressing the two parts firmly into place as shown
in the illustration. Make sure the lamp is securely mounted into the
compartment. Failure to do so may cause a fire or the screen to go dark.
8
Reattach the lamp door.
Replace the door by inserting the two tabs in the slot from the left side.
Slide the lever to the right and then turn the screw clockwise to secure
the door.
Slide the lever to the right and then turn the screw clockwise to secure
the door.
•
Do not touch the inside of the lamp compartment.
•
The lamp is very hot immediately after use. Never touch the glass
portion of the lamp or the surrounding parts.
portion of the lamp or the surrounding parts.
•
After the used lamp has cooled, place it into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag.
replacement lamp. Never put the used lamp into a plastic bag.
•
The lamp compartment is tilted, as shown in the following
illustration.
illustration.
•
If the lamp is not securely reattached, the self-diagnostic function
may be triggered and the POWER LED blinks three times.
may be triggered and the POWER LED blinks three times.
(Continued)
Click on the first or last page to see other KDS-50A2000 / KDS-55A2000 / KDS-60A2000 / KDS-60A2010 service manuals if exist.