Read Sony KDL-V40A12U / KLV-V40A10E Service Manual online
– 11 –
AT2X
RM-EA001 / RM-ED001
Screen Control menu
Automatically changes the screen format according to the broadcast signal.
1
Press OK to select “Auto Format”.
2
Press
M/m to select “On”, then press OK.
To keep your setting, select “Off”.
Tips
• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of
the screen by pressing
repeatedly.
• “Auto Format” is available for PAL and SECAM signals only.
For details about the screen format, see page 15.
1
Press OK to select “Screen Format”.
2
Press
M/m to select “Smart”, “4:3”, “14:9”, “Zoom” or “Wide” (see
page 15 for details), then press OK.
Adjusts the position of the picture for each screen format.
1
Press OK to select “Screen Shift”.
2
Press
M/m to select one of the following, then press OK.
V Shift: Adjusts the vertical picture position.
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press
M/m to select “OK”, then
press OK.
3
Press
M/m (for vertical picture position) or </,(for horizontal picture
position), then press OK.
Tip
When “Screen Format” is set to “4:3” or “Wide”, “V Shift” cannot be adjusted.
You can select the options listed below on the Screen
Control menu. To select options, see “Navigating
through menus” (page 19).
Control menu. To select options, see “Navigating
through menus” (page 19).
Auto Format
Screen Format
Screen Shift
Select:
Set:
Back:
OK
End:
MENU
Auto Format:
Screen Format:
Screen Shift
Screen Format:
Screen Shift
On
Smart
Smart
Screen Control
Features menu
Reduces the power consumption of the TV.
1
Press OK to select “Power Saving”.
2
Press
M/m to select “Reduce”, then press OK.
Switches on/off the TV’s internal speakers.
1
Press OK to select “Speaker”.
2
Press
M/m to select “On” or “Off”, then press OK.
On: The sound of the TV is output through the TV’s speakers.
Off: The sound of the TV is output through the external audio equipment connected to
the audio output sockets
Off: The sound of the TV is output through the external audio equipment connected to
the audio output sockets
.
Sets a signal to be output through the socket labelled
/
2 on the rear of the TV. If
you connect a VCR or other recording equipment to the
/
2 socket, you can then
record from the equipment connected to other sockets of the TV.
1
Press OK to select “AV2 Output”.
2
Press
M/m to select one of the following, then press OK.
Auto: Outputs whatever is being viewed on the screen.
TV Analog: Outputs an analogue broadcast.
TV Digital: Outputs a digital broadcast.
AV1: Outputs signals from equipment connected to the
TV Analog: Outputs an analogue broadcast.
TV Digital: Outputs a digital broadcast.
AV1: Outputs signals from equipment connected to the
/
1 socket.
AV3: Outputs signals from equipment connected to the
/
3 socket.
AV6: Outputs signals from equipment connected to the
6/
6 socket.
You can select the options listed below on the
Features menu. To select options, see “Navigating
through menus” (page 19).
Features menu. To select options, see “Navigating
through menus” (page 19).
Power Saving
Speaker
AV2 Output
Select:
Set:
Back:
OK
End:
MENU
Power Saving:
Speaker:
AV2 Output:
Picture Off:
Speaker:
AV2 Output:
Picture Off:
Standard
On
Auto
Off
On
Auto
Off
Features
Click on the first or last page to see other KDL-V40A12U / KLV-V40A10E service manuals if exist.