Read Sony KDL-V40A11E Service Manual online
– 12 –
AT2X
RM-ED001
Timer menu
Sets a period of time after which the TV automatically switches itself into standby mode.
1
Press OK to select “Sleep Timer”.
2
Press
M/m to select the desired time period (“30min”/“60min”/“90min”/
“120min”), then press OK.
The
(Timer) indicator on the TV (front) lights up in orange.
Tips
• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before
• “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before
the TV switches to standby mode.
• If you press
/
, the remaining time in minutes before the TV switches to standby mode is
displayed on the screen.
Sets the TV to switch to standby mode automatically when you select the input source and
there is no input signal from connected equipment.
In TV mode, this Auto Shutoff function is always set to “On”.
there is no input signal from connected equipment.
In TV mode, this Auto Shutoff function is always set to “On”.
1
Press OK to select “Auto Shutoff”.
2
Press
M/m to select “On”, then press OK.
You can select the options listed below on the Timer
menu. To select options, see “Navigating through
menus” (page 21).
menu. To select options, see “Navigating through
menus” (page 21).
Sleep Timer
Auto Shutoff
Set Up menu
Starts the “first time operation menu” to select the language and country/region, and tune in
all available digital and analogue channels. Usually, you do not need to do this operation
because the language and country/region will have been selected and channels already tuned
when the TV was first installed (page 13, 14). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house, or to search for new channels that have
been launched by broadcasters).
all available digital and analogue channels. Usually, you do not need to do this operation
because the language and country/region will have been selected and channels already tuned
when the TV was first installed (page 13, 14). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house, or to search for new channels that have
been launched by broadcasters).
1
Press OK to select “Auto Start Up”.
2
Press OK to select “Yes”.
The Language menu appears on the screen.
3
Follow steps of “6: Selecting the language and country/region” (page 13)
and “7: Auto-tuning the TV” (page 14).
and “7: Auto-tuning the TV” (page 14).
Selects the language in which the menus are displayed.
1
Press OK to select “Language”.
2
Press
M/m to select the language, then press OK.
All menus will appear in the selected language.
Selects the country/region where you operate the TV.
1
Press OK to select “Country”.
2
Press
M/m to select the country/region in which you will operate the TV,
then press OK.
You can select the options listed below on the Set Up
menu. To select options, see “Navigating through
menus” (page 21).
menu. To select options, see “Navigating through
menus” (page 21).
Auto Start Up
Language
Country
Continued
Click on the first or last page to see other KDL-V40A11E service manuals if exist.