Read Sony KDL-70X4500 Service Manual online
SERVICE MANUAL
EG1H
CHASSIS
LCD Digital Colour TV
MODEL
KDL-70X4500
COMMANDER
RMF-CD001
DEST.
Taiwan
MODEL
COMMANDER
DEST.
RMF-CD001
KDL-70X4500
KDL-70X4500 (WB) 2
SPECIFICATIONS
Model name
KDL-70X4500
System
Input/Output jacks
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: M
Digital: DVB-T
Digital: DVB-T
Colour/video system
Analogue: NTSC3.58
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage
Analogue:VHF: 2 to 13 / UHF: 14 to 69 /CATV: 1 to 125
Digital: DVB-T
Digital: DVB-T
Sound output
10 W + 10 W, 12 W + 12 W (Woofer)
Antenna
75 ohm external terminals for VHF/UHF and CATV
S (S VIDEO) 1
S video input (4-pin mini DIN)
(VIDEO) 1, 2, 3
Video input (phono jacks)
(Component IN)
Supported formats: 1080p, 1080i, 720p, 480p, 480i
1, 2
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
(AUDIO) 1, 2, 3
Audio input (phono jacks)
HDMI (HDMI IN)1, 2,
Video: 1080/24p, 1080p, 1080i, 720p, 480p, 480i
3, 4
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI (HDMI IN) 1 only)
(AUDIO) PC Input
Analogue audio input (minijack) (HDMI (HDMI IN) 1 only)
(AUDIO) PC Input
Digital optical jack
(OPTICAL DIGITAL AUDIO
OUTPUT)
OUTPUT)
(VIDEO OUT)
Video output (phono jack)
(AUDIO OUT)
Audio output (phono jacks)
PC (PC IN) (RGB)
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
(AUDIO) PC audio input (minijack)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
(AUDIO) PC audio input (minijack)
DMPORT (DMPORT)
DIGITAL MEDIA PORT
USB port
i
Headphones jack
(LAN)
10BASE-T/100BASE-TX connector (Depending on the operating environment
of the network, connection speed may differ. 10BASE-T/100BASE-TX
communication rate and communication quality are not guaranteed for this TV.)
of the network, connection speed may differ. 10BASE-T/100BASE-TX
communication rate and communication quality are not guaranteed for this TV.)
Power and others
Power requirements
110 V AC, 60 Hz
Screen size (measured
70 inches
diagonally)
(Approx. 177.8 cm)
Display resolution
1,920 dots (horizontal)
× 1,080 lines (vertical)
Power
in “ (Home)”/
600 W
consumption
“ (Standard)”
mode
mode
in “ (Shop)”/
680 W
“ (Vivid)”
mode
mode
Standby power
0.3 W (40 W when “
consumption*
(Quick Start)” is set to “ (On)”)
* Specified standby power is reached after the TV finishes necessary internal processes.
Dimensions
(Approx.)
(w
(Approx.)
(w
× h × d)
Mass
(Approx.)
(Approx.)
with Table-Top Stand
without Table-Top
Stand
Stand
with Table-Top Stand
without Table-Top
Stand
Stand
Optional
accessories
accessories
Wall-Mount Bracket
Colour Variation
Unit
Unit
1,850
× 1,065 × 401 mm
1,850
× 1,012 × 153 mm
86.5 kg
72.5 kg
SU-WL500
KDL-70X4500 (WB) 3
Resolution
lution
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
PC input signal reference chart for PC (PC IN) and HDMI (HDMI IN) 1, 2, 3, 4
Design and specifications are subject to change without notice.
Signals
Horizontal
(Pixel)
(Pixel)
Vertical
(Line)
(Line)
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
640
480
37.5
75
VESA
720
400
31.5
70
VGA-T
SVGA
800
600
37.9
60
VESA Guidelines
800
600
46.9
75
VESA
XGA
1024
768
48.4
60
VESA Guidelines
1024
768
56.5
70
VESA
1024
768
60.0
75
VESA
WXGA
1280
768
47.4
60
VESA
1280
768
47.8
60
VESA
1280
768
60.3
75
1360
768
47.7
60
VESA
SXGA
1280 1024
64.0
60
VESA
HDTV
1920
1080
67.5
60
CEA-861*
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This
affects the “ (Video Settings)” menu and “ (Screen)” menu settings.
To view PC contents, set “ / (Game/Text Mode)” to “ (On)”, “ (Wide
Mode)” to “16:9 (Full)”, and “ (Display Area)” to “ (Full Pixel)”.
To view PC contents, set “ / (Game/Text Mode)” to “ (On)”, “ (Wide
Mode)” to “16:9 (Full)”, and “ (Display Area)” to “ (Full Pixel)”.
•
This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
KDL-70X4500 (WB) 4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
