Read Sony KDL-65W850A / KDL-65W855A Service Manual online
RB1G
CHASSIS
W850/855A
Service Adjustment
Save Changing Data by Service Mode 2
1.
In “Digital” service mode ( “002 MODEL” category)
000 SEGSelect segment information
S S
f
Only when B* board is replaced.
4-5. Restore WB / Gamma Adj. Data to B board.
HG,TE, CM, MH Models
Please apply after USB-DL when B board is replaced.
001 DESTSelect destination information
002 MODELNAMESelect Model Name
003 SERIALCan be set Only Once for the new board
005 VAR_TYPESelect variable information (Refer to Pg80 4-5.)
002 MODELNAMESelect Model Name
003 SERIALCan be set Only Once for the new board
005 VAR_TYPESelect variable information (Refer to Pg80 4-5.)
a.
Change data for each model. (Refer to Pg79 4-4.) except
1.in “VPC” service mode
a.Select “000 DATA_COPY” category by pressing “2 / 5” on remote.
b.Change data from “0” to “1” by pressing “3 / 6” on remote.
c.Wait until data is changed from 1 to 3.
d When data is changed from 1 to 3 restoring process is finished
b.Change data from “0” to “1” by pressing “3 / 6” on remote.
c.Wait until data is changed from 1 to 3.
d When data is changed from 1 to 3 restoring process is finished
VAR_TYPE.
b.
Press “Mute”, “0” on remote sequentially. Red “
WRITE
” is
shown. This indicates writing is in process.
c.
After a while, red “
WRITE
” disappears. Green
Done
will be
di
l
d f
hil
hi h
i i
i d
d.When data is changed from 1 to 3, restoring process is finished.
e.In case data is changed from 1 to 2, keep default setting. (No
more process is needed.)
e.In case data is changed from 1 to 2, keep default setting. (No
more process is needed.)
VPC
SERVICE
displayed for a while, which means writing process is done.
d.
d.
For the items SEG, DEST, MODELNAME after changing
For the items SEG, DEST, MODELNAME after changing
each item, service save (“mute”+”0”) is required. For the
each item, service save (“mute”+”0”) is required. For the
each item, service save (“mute”+”0”) is required. For the
item SERIAL, after inputting the serial number, press key
item SERIAL, after inputting the serial number, press key
item SERIAL, after inputting the serial number, press key
“12” or “Enter” to save the data.
“12” or “Enter” to save the data.
“12” or “Enter” to save the data.
b
VPC
SERVICE
000
DATA_COPY
000
BU_TRANS
1
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
DO NOT TOUCH ANY KEY NOW
12 or Enter to save the data.
12 or Enter to save the data.
–
–
Please save the items according to the sequence “SEG
Please save the items according to the sequence “SEG -->
>
DEST
DEST --> MODELNAME
> MODELNAME
–
–
When Saving the item "SEG", sometimes instead of
When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"Writing", the word "Pending" will appear. In this case, skip
"Writing", the word "Pending" will appear. In this case, skip
a
b
VPC
SERVICE
000
DATA_COPY
000
BU TRANS
3
Restore process
Writing , the word Pending will appear. In this case, skip
Writing , the word Pending will appear. In this case, skip
"SEG", saving "DEST“ and "MODELNAME“ is OK.
"SEG", saving "DEST“ and "MODELNAME“ is OK.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
HG_BASE
Write
a
a
a
000
BU_TRANS
3
DATA TRANSFER SUCCESS
Write
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
TUNER/----/---- ----/----/NTSCU
X
/
X
/
b
b
Remote Commander
End restore process
----X----/----- ----X----/-----
-----/---
-----/---
-----/---
DIGITAL Service menu
Remote Commander
125
Click on the first or last page to see other KDL-65W850A / KDL-65W855A service manuals if exist.