Read Sony KDL-65HX729 Service Manual online
KDL-65HX729 A-2
APPENDIX A - REMOVING THE REAR COVER
REMOVING THE POWER CORD AND THE
RU CONNECTOR
The AC Power Cord is connected to the Power Supply Board and
then routed out through the Rear Cover. When removing the Rear
Cover use caution to avoid pulling the AC Power Cord which may
damage the cord.
The RU Connector is connected to the Main Board. When removing
The RU Connector is connected to the Main Board. When removing
the Rear Cover use catuion to avoid pulling the RU Connector which
may damage the Main Board.
Caution: These instructions should be followed whenever
removing the Rear Cover.
1. Remove all screws, include the screw in the AC cover,
from the Rear Cover.
(For detailed information, refer to
“Rear Cover and RU
Board Removal” on page 44
.)
2. Using a small flat-head screwdriver, push the tab to the
right to lift out the Wireless Antenna Cover located on
the bottom right side of the Rear Cover.
3. Using gloves or a cloth for protection against the sharp
edges, grasp the corner of the Rear Cover from inside
the Wireless Antenna Cover and lift up.
Click on the first or last page to see other KDL-65HX729 service manuals if exist.