Read Sony KDL-55W805A Service Manual online
KDL-55W805A 18
SECTION 3 - REPAIR INFORMATION
REMOVING THE SMART CORE BLOCK
1. Remove 1 screw, then release the Harness from Smart Core Block
Cover hooks.
2. Firmly lift up the Smart Core Block Cover left side to remove.
NOTE:
To avoid damaging the Smart Core Block Cover, removal MUST
start from the left side as shown
.
3. Disconnect 2 connectors from the Smart Core Block.
4. Grasp Smart Core Block as shown, then twist it downwards to release.
5. Release connector from Lid, SC hook to disconnect.
6. Unclamp 2 side clips from the Lid, SC and lift as shown to detach.
LID, SC
7.
Carefully, using a flat edge object (ex. steel ruler), release the clip
located on the right side corner, and pull as shown to detach the Panel
Ornament.
located on the right side corner, and pull as shown to detach the Panel
Ornament.
8. Remove HIR, Wi-Fi PWB Board and BT Module.
HIR, BOARD
BT, MODULE
WIFI PWB
9. Release 2 hooks from HSC Board and detach.
HSC
BOARD
Click on the first or last page to see other KDL-55W805A service manuals if exist.