Read Sony KDL-55NX817 / KDL-60NX817 Service Manual online
KDL-55NX817/60NX817
15
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. G9/G10/G11 (POWER) BOARDS, BUHT(MAIN) BOARD, HLT BOARD,
WIRELESS LAN CARD AND LCD PANEL ASSEMBLY REMOVAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
A-1788-134-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
108
4-188-665-01
BRACKET, SIDE JACK
109
4-188-666-01
BRACKET, TERMINAL
110
1-474-257-11
G9 BOARD, COMPLETE
111
4-188-690-01
SHEET, INSULATION (G)
2-990-421-41
SCREW (+PSW) (M3X6)
1-3-1. KDL-55NX817 ONLY
CAUTION: Refer to
“Special Handling Instructions When Replacing the LCD Panel Assembly” on page 5
A Gently peel-off Terminal Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
C Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
E Gently peel-off Tape PWB (H) to detach from HLT Board
F Remove 9 screws from BUHT Board to detach from LCD Panel Assembly
G Release 2 clips to detach Side Jack Bracket from BUHT Board
H Release 2 clips to detach Terminal Bracket from BUHT Board
101
NA
P-MOD/T-MOD (LCD PANEL ASSEMBLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMBLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102
4-199-300-01
LABEL, TERMINAL
103
4-199-294-01
LABEL, SIDE JACK (L)
104
1-487-819-11
CARD, WIRELESS LAN
105
A-1782-538-A
HLT(STD) BOARD, MOUNTED
106
4-195-059-01
TAPE, PWB (H)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
106
105
108
109
111
110
104
103
102
101
F
E
D
G
H
J
K
I
C
B
A
I Remove 3 screws from G9 Board to detach from LCD Panel
Assembly
J Gently peel-off Insulation Sheet (G) to detach from LCD
Panel Assembly
K Slide-out 2 Attachment GL pieces to detach from LCD Panel
Assembly
Note: The Tape PWB (H), Side Jack Label,
Terminal Label, Insulation Sheet (G) and
Attachment GL pieces are not included with
the LCD Panel Assembly and
must be replaced when replacing
the LCD Panel Assembly.
Click on the first or last page to see other KDL-55NX817 / KDL-60NX817 service manuals if exist.