Read Sony KDL-55HX950 / KDL-55HX953 / KDL-55HX955 / KDL-65HX950 / KDL-65HX953 / KDL-65HX955 Service Manual online
KDL-55/65HX950,953,955(AEP)
16
SELF DIAGNOSIS FUNCTION
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to
indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
When an error occurs, the STANDBY LED will flash a set number of times to
indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
The units in this manual contain a self-
diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
0.5
0.5
3
DISPLAY OF STANDBY LED FLASH COUNT
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
[To Bring Up Screen Test]
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
STBY LED
Flash time
Service menu Item
name
(Screeen Display)
Diagnostic Item Description
2
MAIN_POWE
Main 12 V failure
DC_ALERT
Main 5.0/3.3/1.2 V failure
AUD_PROT
Audio amp. Protection
HDMI_EQ
HDMI equalizer/switch I2C NACK
TU_DEMOD
Tuner or demodulator I2C NACK
VLED
LED voltage protection
LD-ERR
LED driver failure
FRC-LED driver SP1 failure
FRC-LED driver SP1 failure
HFR_ERR
FRC device I2C NACK
TCON_ERR
FRC device Initialization failure
PE Micro (PEM) not started
PE Micro (PEM) not started
P_ID_ERR
Panel ID NVM Error
6
BACKLITE
Backlight convert OVP
TEMP_ERR
Thermal Error
FAN_ERR
Not used
8
-
Software Error (No Screen Display)
(Also the main board’s memory or Wi-Fi module is a suspect)
(Also the main board’s memory or Wi-Fi module is a suspect)
9
-
Not used
10
EMIT_ERR
Transmitter board not connected
11
-
Not used
12
-
Not used
3
5
7
4
Click on the first or last page to see other KDL-55HX950 / KDL-55HX953 / KDL-55HX955 / KDL-65HX950 / KDL-65HX953 / KDL-65HX955 service manuals if exist.