KDL-52W5500 - Sony TV Service Manual (repair manual). Page 13

The ‘HL4A’ board can then be removed by releasing the
2 clips circled.

To remove the ‘HL4A’ board first remove the ‘Guide, Led’.
This can be removed by disconnecting the 1 connector
indicated and releasing the 1 clip circled.

       Clips

Connector

       Clips

To remove the ‘HSN’ board disconnect the 1 connector
indicated and then release the 1 clip circled, the ‘HSN’ board
can then be gently eased away from the ‘Guide, IR’.

       Clip

Connector

     Screws

To remove the ‘D5N’ board disconnect all the connectors and
then remove the 4 screws circled and ease the board gently
away from the back of the TV set.

Note: Refer to page 4 - Hirose MDF61 connector.

     Screws

To remove the ‘D6N’ board disconnect all the connectors and
then remove the 4 screws circled and ease the board gently
away from the back of the TV set.

Note: Refer to page 4 - Hirose MDF61 connector.

Screw Part number(s) and Description(s)

2-580-629-01  SCREW, +BVST 3X8

Screw Part number(s) and Description(s)

2-580-629-01  SCREW, +BVST 3X8