Read Sony KDL-52S5100 / KDL-52V5100 Service Manual online
13
KDL-52S5100/52V5100
KDL-52S5100/52V5100
SECTION 1: DISASSEMBLY
1-1. REAR COVER REMOVAL
1 Lift up the bottom of Switch Unit from Bezel and unhook from Bezel
2 Disconnect 1 connector from HW3 Board
1 Remove 20 screws from Rear Cover
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from Rear Cover
5 Remove 4 screws from Rear Cover
NOTE: The Rear Cover is attached to the Bezel Assembly with three small tabs.
Use caution when removing the Rear Cover not to damage these tabs.
1-2. SWITCH UNIT REMOVAL (CONTAINS HSW3 BOARD)
1
Screw,
+BVTP2 4X16
+BVTP2 4X16
2 Screw,
+BVTP 3X12 TYPE2 IT-3
4
Screw,
+PSW M4X12
+PSW M4X12
5
Screw,
+PSW M5X16
+PSW M5X16
3 Screw,
+BVTP 3X12 TYPE2 IT-3
Rear Cover
Bezel
Tab Inserts
Bezel
Switch Unit (Contains HSW3 Board)
1
2
Click on the first or last page to see other KDL-52S5100 / KDL-52V5100 service manuals if exist.