Read Sony KDL-48R485B Service Manual online
KDL-48R485B 15
SECTION 3 - REPAIR INFORMATION
16. Press
or
to select characters and then to move to the next
space until Model Name is complete.
NOTE
: Make sure to include dash in Model Name.
>>
Self diagnosis history
>>
Wide Band Tuning
>>
LVDS Spectrum (%)
29
Tuning System
Auto
Status Digital RF Information
Off
Off
Low of HPD
5
UART Selection
Factory
TEST RESET
[</>]Set [Home] Exit
Service Mode
NS4S480DND0101
Status Information
<[
]>
<[
]>
<[
]>
<[
]>
<[
]>
<[
]>
Off
Panel Selection
SERIAL NUMBER EDIT
MODEL NAME EDIT
KDL-48R485B
2000001
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes.
17.
When the complete Model Name displays, press
.
18. On the confirmation screen, press to select
YES and then
.
Input Data Correct?
Yes
No
Selected text displays in black
19. Press
POWER
to exit
Service Mode.
REMOVING THE SPEAKERS
1.
Disconnect the connector from Speakers and lift as shown to detach.
REPLACING THE SWITCH UNIT
1.
Disconnect the connector from the Switch Unit and lift as
shown to remove.
2.
Install the new Switch Unit and its connector.
Click on the first or last page to see other KDL-48R485B service manuals if exist.