Read Sony KDL-46XBR9 / KDL-52XBR9 Service Manual online
12
KDL-46XBR9/52XBR9
KDL-46XBR9/52XBR9
SECTION 1: DISASSEMBLY
1-1. REAR COVER REMOVAL
1-1-1. REAR COVER REMOVAL (KDL-46XBR9 ONLY)
1 Remove 8 screws from Rear Cover
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from VESA positions
5 Remove 3 screws from Bottom Frame positions
6 Carefully lift Rear Cover bottom side and rotate toward top side
7 Release Clamps and remove Rear Cover from Front Cabinet Assembly
NOTE:
The Rear Cover is attached to Front Cabinet Assembly with small Clamps.
Use caution when removing the Rear Cover not to damage these Clamps.
To re-install the Rear Cover, press the Rear Cover down on Clamps (3 places) to lock into position.
1
Screw,
+BVTP2 4X16
+BVTP2 4X16
2 Screw,
+BVTP 3X12 TYPE2 IT-3
4
Screw,
+PSW M5X12
+PSW M5X12
5
Screw,
+PSW M5X12
+PSW M5X12
6
7
3 Screw,
+BVTP 3X12 TYPE2 IT-3
Rear Cover
Rear Cover
Front Cabinet Assembly
Front Cabinet Assembly
Clamps
Click on the first or last page to see other KDL-46XBR9 / KDL-52XBR9 service manuals if exist.