Read Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 (serv.man2) Service Manual online
5
KDL-46NX810/55NX810/55NX811/60NX810
KDL-46NX810/55NX810/55NX811/60NX810
SPECIAL HANDLING INSTRUCTIONS WHEN REPLACING THE LCD PANEL ASSEMBLY
Use the following precautionary guidelines when handling the LCD Panel Assembly to avoid material degradation or screen coating degradation, and
ensure that dust, dirt, or fingerprints are not left between the glass and the LCD Panel Assembly.
1. After removing the boards and connectors, note where the frame is on the panel. (See Figure 1)
2. Lift the LCD Panel Assembly by holding the top and bottom of the panel approximately 200mm from
the edge with your palms on the back of the panel. (See Figure 2)
CAUTION: Lifting or holding the panel at the corners may damage the panel.
3. Use the same method when taking the replacement panel out of the carton. (See Figure 3)
Figure 1
Figure 2
Figure 3
CAUTION: DO NOT lift the LCD Panel by holding the short side of the panel or by placing your palms
on the front glass. (See Figures 4 & 5)
Figure 4
Figure 5
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 (serv.man2) service manuals if exist.