Read Sony KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 Service Manual online
KDL-46NX800/52NX800/60NX800/60NX801
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
1-4. GE2B/GE2A (POWER) BOARDS, BUHS BOARD, AND LCD PANEL REMOVAL
A Remove 5 screws from GE2B/GE2A (Power) Boards
B Disconnect 5 connectors from GE2B/GE2A (Power) Boards
B Disconnect 5 connectors from GE2B/GE2A (Power) Boards
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Remove 8 screws from BUHS Board
D Remove 8 screws from BUHS Board
E Disconnect 5 connectors from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Carefully Lift up Panel to remove from Bezel
201
A-1773-995-A
GLASS (46PIC) ASSEMBLY
(KDL-46NX800 ONLY)
201
A-1773-996-A
GLASS (52PIC) ASSEMBLY
(KDL-52NX800 ONLY)
201
A-1773-997-A
GLASS (60PIC) ASSEMBLY
(KDL-60NX800 ONLY)
201
A-1774-833-A
GLASS (60PIC_S) ASSEMBLY
(KDL-60NX801 ONLY)
202
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
203
X-2547-018-1
BRACKET, SIDE JACK T ASSEMBLY
204
A-1765-668-B
BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BUHS Board or LCD Panel.
NOTE: Final software is not installed on this BUHS Board.
Install the update after replacing this board using the instructions
provided with the software.
205
4-172-021-21
BRACKET, TERMINAL T (UC)
(FOR US/CND MODELS ONLY)
205
4-172-021-51
BRACKET, TERMINAL T (UC_LA)
(FOR MX/LA MODELS EXCEPT KDL-60NX801)
206
1-474-212-11
GE2B (POWER) BOARD, COMPLETE
(KDL-46NX800/52NX800 ONLY)
206
1-474-211-11
GE2A (POWER) BOARD, COMPLETE
(KDL-60NX800/60NX801 ONLY)
2-580-592-01
SCREW, +PSW M3X8
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
D
E
F
G
B
C
A
204
203
202
201
206
205
Click on the first or last page to see other KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 service manuals if exist.