Read Sony KDL-46HX857 / KDL-55HX857 Service Manual online
KDL-46HX857/55HX857 38
SECTION 5 - UPDATES AND ADJUSTMENTS
UPDATING THE SOFTWARE
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
1. Check for latest Software Version through Network Connection or
Reference Library.
2. Connect and Configure TV Network Connection.
3. Display the menu by pressing
3. Display the menu by pressing
HOME
.
4. Using the and the
on the on the Remote Control,
select the following:
Settings
Product Support
Software
Update.
NOTE: If TV is not connected to a network, download the latest
software for these models and install using a USB device.
5. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Replacing
the Main Board” on page 38
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 36
.
REPLACING THE MAIN BOARD
The Main Board should be replaced only if all other options have not
resolved the issue.
Verify before proceeding to the next step:
resolved the issue.
Verify before proceeding to the next step:
;
Verified the error is an 8X error.
;
Reset the TV to Factory Condition
;
Updated the Software
1. Follow all of the instructions in
“Completing Service Requirements
When Replacing the Main Board” on page 28
.
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL OR TCON BOARD
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
●
Updating the Software
●
Copying the BU Flash Data
●
Confirming the Model ID and Product ID
●
Resetting the Panel Operation Time
●
Clearing the Self Diagnosis Self Check Information
UPDATING THE SOFTWARE
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV ON.
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software”.
2. After the update is complete, proceed to
“Copying the BU Flash
Data”.
Click on the first or last page to see other KDL-46HX857 / KDL-55HX857 service manuals if exist.