Read Sony KDL-46HX820 / KDL-55HX820 Service Manual online
Service Adjustment
4-5-3. Save changing data by Service Mode 2 (for 002 MODEL category)
4-6. White Balance Adjustment
KDL- 46HX820, 55HX820
RM-GD017
3 T
h
i
d d
1. This is only required only when B Board is replaced.
2. Items in Digital service mode for 002 MODEL category.
2. Items in Digital service mode for 002 MODEL category.
000 SEG
・・・Select segment information
001 DEST
・・・Select destination information
002 MODELNAME
・・・ Select Model Name
003 SERIAL
・・・Can be set Only Once for the new board
To access to White Balance Service mode, choose VPC Service Mode.
a. Press key 1 or 4 on remote commander to select WB adjustment menu.
a. Press key 1 or 4 on remote commander to select WB adjustment menu.
006 WB category will be seen on the menu.
b. Change data by pressing 3 or 6. Each range of these items is 0~255.
c. Press mute
c. Press mute
+ 0 on remote commander to save the data.
SERVICE comment is changed to WRITE, indicating writing process.
d Af
hil
WRITE
SERVICE
hi h
3. To change category, item and data :
a. Press key 2 or 5 on remote commander to select (up or down) category.
b. Press key 1 or 4 on remote commander to select (up or down) Item.
c. Press key 3 or 6 on remote commander to change (up or down) data.
b. Press key 1 or 4 on remote commander to select (up or down) Item.
c. Press key 3 or 6 on remote commander to change (up or down) data.
Remote commander key : 1, 2, 3 is for increment
Remote commander key : 4, 5, 6 is for decrement
Remote commander key : 4, 5, 6 is for decrement
4 Press mute + 0 on remote commander
It shows red WRITE as the indication
d. After a while, WRITE comment returns to SERVICE, which means
writing process is done. (takes about a couple of seconds)
4. Press mute + 0 on remote commander . It shows red WRITE as the indication
that writing is in process.
5. After a while, red WRITE dissappers. Green Done will Display for a while,
which means writing process is done.
6. For the item SEG, DEST MODELNAME, after changing each item, service
save(mute+0) is needed.
For the item SERIAL after inputting the serial number press key 12 or Enter the
For the item SERIAL after inputting the serial number press key 12 or Enter the
VPC
SERVICE
006
WB
000
R_DRV
128
VPC
SERVICE
006
WB
003
R_BKG
128
For the item SERIAL, after inputting the serial number, press key 12 or Enter, the
serial data will be saved.
serial data will be saved.
7. Please save the item SEG, DEST, MODELNAME sequentially.
(①SEG→
②DEST→③MODELNAME)
8. When Saving the item "SEG", sometimes instead of "Writing", word "Pending"
will appear. In this case, skip the "SEG", save the "DEST" and "MODELNAME" is
OK..
will appear. In this case, skip the "SEG", save the "DEST" and "MODELNAME" is
OK..
VPC
SERVICE
006
WB
001
G_DRV
128
VPC
SERVICE
006
WB
VPC
SERVICE
006
WB
004
G_BKG 128
VPC
SERVICE
006
WB
a
b
VPC Service menu sample
006
WB
002
B_DRV
128
006
WB
005
B_BKG
128
c
a
b
c
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
I-1
W it
W it
DIGITAL Service menu
Remote Commander
– 37 –
Write
Remote Commander
Click on the first or last page to see other KDL-46HX820 / KDL-55HX820 service manuals if exist.