KDL-42W805B - Sony TV Service Manual (repair manual). Page 4

Read Sony KDL-42W805B Service Manual online

KDL-42W805B iii
CAUTIONS AND WARNINGS
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and from all 
exposed metal parts to any exposed metal part having a return to chassis, 
must not exceed 0.5 mA (500 microamperes). Leakage current can be 
measured by any one of three methods.
1.  A commercial leakage tester.  
Follow the manufacturers’ instructions provided with the tester.
2.  A battery-operated AC milliammeter. 
3.  Measuring the voltage drop across a resistor by means of a VOM 
or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so 
analog meters must have an accurate low voltage scale. Nearly all 
battery-operated digital multimeters that have a 2 VAC range are 
suitable. (see Figure A)
To Exposed Metal
Parts on Set
0.15 µF
Earth Ground
AC
Voltmeter
(0.75V)
Figure A. Use an AC voltmeter to check AC leakage.
HOW TO FIND A GOOD EARTH GROUND
The cover-plate retaining screw on most AC outlet boxes is at earth 
ground. Verify the AC outlet box retaining screw ground by connecting 
a 60W to 100W incandescent (not a neon or fluorescent lamp) between 
the hot side of the receptacle and the retaining screw. Try both slots, 
if necessary, to locate the hot side on the line; the lamp should light at 
normal brilliance if the screw is at ground potential. (see Figure B)
Figure B. Checking for earth ground.
Trouble Light
AC Outlet Box
Page of 28
Display

Click on the first or last page to see other KDL-42W805B service manuals if exist.