Read Sony KDL-42R500A / KDL-47R500A (serv.man2) Service Manual online
KDL-42/47R500A(PA)
17
SEC 2. ADJUSTMENT
HOW TO ENTERING SERVICE MODE
1) Turn on the main power switch to place this set in standby mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
3) Service mode display.
Service Mode
Status Information
>>
Self diagnosis history
>>
Panel Selection
<[16_LC420EUN_PAD]>
NO_SIGNAL_MUTE
<[
Off
]>
TUNING SYSTEM
<[
AUTO
]>
LVDS Spectrum (%o)
<[
30
]>
Low of HPD
<[
5
]>
UART Selection
<[
No log
]>
SERIAL NUMBER EDID
001A0MK
MODEL NAME EDID
KDL-42R500A
[</>]Set[Home]Exit
Panel Selection
MODEL NAME EDID
16_LC420EUN_PAD
KDL-42R500A
17_LC470EUN_PAD
KDL-47R500A
- When replace Main Board or panel, please confirm "Panel Selection" and "MODEL NAME EDID" in service mode.
If they are different, please select a suitable thing.
- Change of SERIAL NUMBER EDID and MODEL NAME EDID are possible only once when they are white character.
Note: About the software data update, please refer to “APPENDIX-2”.
Click on the first or last page to see other KDL-42R500A / KDL-47R500A (serv.man2) service manuals if exist.