Read Sony KDL-40Z4500 / KDL-46Z4500 / KDL-52Z4500 (serv.man3) Service Manual online
– 5 –
KDL-40, 46, 52 Z4500
RM-GD005
SECTION 2
SELF DIAGNOSTIC FUNCTION
2-4. LED Pattern
When safety shutdown occurs, Standby LED display reports the
cause by using the lightning patterns as indicated below.
When safety shutdown occurs, Standby LED display reports the
cause by using the lightning patterns as indicated below.
Example:
The figure above shows LED display when
SHUTDOWN is caused by DC_ALERT 2. It repeats
flashing for a specified number of times in 0.3sec/
cycle and has a 2 seconds interval of lighting off.
Please note that a 2 seconds interval of lighting off
is fixed regardless of abnormal state types.
SHUTDOWN is caused by DC_ALERT 2. It repeats
flashing for a specified number of times in 0.3sec/
cycle and has a 2 seconds interval of lighting off.
Please note that a 2 seconds interval of lighting off
is fixed regardless of abnormal state types.
2-5. Self Diagnostic Screen Display
To bring up the self diagnostic screen display
In standby mode, press the following sequence of buttons in
quick succession on the remote commander as shown below:
quick succession on the remote commander as shown below:
The following menu appears as shown below:
2.0 sec
2.0 sec
0.3 sec
0.3 sec
2-1. Overview of Control Buttons
LED Typ e
Description
Remark
Status
Display
Power LED
Remark
POWER
Green: LED
Green lights at power ON.
STANDB
Picture Off/
Timer
Timer
Y
Red: One LED
Red lights during standby.
Green/Amber
: Two LEDs
: Two LEDs
Green lights during Picture
OFF and amber lights
during Timer activation.
OFF and amber lights
during Timer activation.
POWER ON
Green lights
OFF
in a normal state.
STANDBY
OF
OFF
F
Red lights
Red flashes
Microcomputer is
in a sleep state.
Failure
Classify the trouble
causes by the no.
of red blinking.
causes by the no.
of red blinking.
Standby LED
Microcomputer is
2-2. LED Display Specification
2-3. LED Display Control
POWER
HOME
MENU
MENU
OK
INPUT
SELECT
VOLUME
CHANNEL
REMOTE
SENSOR
SENSOR
LIGHT
SENSOR
POWER
INDICATOR
STANDBY
INDICATOR
PICTURE OFF/
TIMER INDICATOR
i+
5
-
(ON SCREEN (DIGIT 5) (VOLUME -) (TV POWER)
DISPLAY)
DISPLAY)
Note that this differs from
entering the service mode
(volume + )
entering the service mode
(volume + )
Click on the first or last page to see other KDL-40Z4500 / KDL-46Z4500 / KDL-52Z4500 (serv.man3) service manuals if exist.