KDL-40WE5, KDL-46WE5 - Sony TV Service Manual (repair manual). Page 13

The ‘HL4A’ board can then be removed by releasing the
2 clips circled.

To remove the ‘HL4A’ board first remove the ‘Rear Cover’
(See Sec 2-2-1 and 2-2-2), the ‘Stand Assy’ (See Sec 2-2-4)
and then the ‘Under Cover’ (See 2-2-5). The ‘Guide, Led’ can
then be removed by disconnecting the 1 connector indicated
and releasing the 1 clip circled.

       Clips

Connector

       Clips

To remove the ‘HSN’ board disconnect the 1 connector
indicated and then release the 1 clip circled, the ‘HSN’ board
can then be gently eased away from the ‘Guide, IR’.

       Clip

Connector

     Screws

Screw Part number(s) and Description(s)

2-580-629-01  SCREW, +BVST 3X8

To remove the ‘IP3’ board disconnect all the connectors and
then remove the 4 screws circled and ease the board gently
away from the back of the TV set.

Note: Refer to page 4 - Hirose MDF61 connector.

The ‘HMS’ board can then be removed by releasing the
1 clip circled.

To remove the ‘HMS’ board first remove the ‘Rear Cover’
(See Sec 2-2-1 and 2-2-2), the ‘Stand Assy’ (See Sec 2-2-4)
and then the ‘Bar Under’. The ‘Bracket, Sensor’ can then be
removed by disconnecting the 1 connector indicated and
releasing the 2 clips circled.

Connector

       Clip

       Clips