Read Sony KDL-40W580B / KDL-40W590B / KDL-40W600B / KDL-40W605B / KDL-40W607B / KDL-40W609B / KDL-48W580B / KDL-48W590B / KDL-48W600B / KDL-48W605B / KDL-48W607B / KDL-48W609B / KDL-60W605B / KDL-60W607B / KDL-60W610B / KDL-60W630B Service Manual online
Chassis: RB2G, HM
Chassis: RB2G, HM
117
When ordering parts by reference
number, please include the board name.
NOTE: The components identified by shading
and
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to
whenever these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this
manual.
whenever these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this
manual.
AFTER REPLACING THE MAIN BOARD OR LCD PANEL YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND COMPLETE ANY SERVICE ADJUSTMENTS
*
Items marked with an asterisk are not
stocked since they are seldom required for
routine service. Expect some delay when
ordering these components.
RESISTORS
• All resistors are in ohms
• F : nonflammable
• All variable and adjustable resistors have
characteristic curve B, unless otherwise noted.
REF. NO.
PART NO.
DESCRIPTION
REMARKS
REF. NO.
PART NO.
DESCRIPTION
REMARKS
RB5012 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB5012 125757821
CONDUCTOR, NETWORK (1005X4)
RB5013 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB5013 125757821
CONDUCTOR, NETWORK (1005X4)
RB5014 123437821
RES, NETWORK 10K (1005X4)
10 K
RB5016 123438021
RES, NETWORK 47K (1005X4)
47 K
RB5016 125754821
RES, NETWORK 47K (1005X4)
47 K
RB5017 123438021
RES, NETWORK 47K (1005X4)
47 K
RB5017 125754821
RES, NETWORK 47K (1005X4)
47 K
RB5018 123438021
RES, NETWORK 47K (1005X4)
47 K
RB5018 125754821
RES, NETWORK 47K (1005X4)
47 K
RB5019 123438021
RES, NETWORK 47K (1005X4)
47 K
RB5019 125754821
RES, NETWORK 47K (1005X4)
47 K
RB5022 123436921
RES, NETWORK 10 (1005X4)
10 O
RB6005 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6006 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6012 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6040 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB6041 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB6042 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB6043 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB6044 123440021
CONDUCTOR, NETWORK (1005X4)
0.05 O
0A
RB6402 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6403 123472321
RES, NETWORK 75 (1005X4)
75 O
RB6403 125755121
RES, NETWORK 75 (1005X4)
75 O
RB6404 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6406 123437121
RES, NETWORK 47 (1005X4)
47 O
RB6501 123437821
RES, NETWORK 10K (1005X4)
10 K
RB7001 123437621
RES, NETWORK 2.2K (1005X4)
2.2 K
RB7002 123437621
RES, NETWORK 2.2K (1005X4)
2.2 K
RB8501 123437021
RES, NETWORK 22 (1005X4)
22 O
RB8504 123437121
RES, NETWORK 47 (1005X4)
47 O
RB8505 123437121
RES, NETWORK 47 (1005X4)
47 O
RB8517 123437121
RES, NETWORK 47 (1005X4)
47 O
RB8518 123437121
RES, NETWORK 47 (1005X4)
47 O
RB9101 123437821
RES, NETWORK 10K (1005X4)
10 K
RB9601 123437221
RES, NETWORK 100 (1005X4)
100 O
RB9602 125754421
RES, NETWORK 100 (1005X4)
100 O
RB9603 125754421
RES, NETWORK 100 (1005X4)
100 O
T6400
144595511
PULSE TRANSFORMER
T1
T6400
144598011
PULSE TRANSFORMER
T1
VD5004 180207811
VARISTOR (SMD)
27 V
0M
T1
VD5004 180209021
VARISTOR, CHIP
27 V
0M
T1
VD5009 180207811
VARISTOR (SMD)
27 V
0M
T1
VD5009 180209021
VARISTOR, CHIP
27 V
0M
T1
VD5013 180207811
VARISTOR (SMD)
27 V
0M
T1
VD5013 180209021
VARISTOR, CHIP
27 V
0M
T1
VD8003 111838611
CAP, CERAMIC 0.1MF X7R 1005
0.1 U
16V
10%
X6400
181467611
QUARTZ CRYSTAL UNIT(25MHZ)
25 M
20PPM T1
X6400
181467711
QUARTZ CRYSTAL UNIT(25MHZ)
25 M
20PPM T1
X6501
181475911
QUARTZ CRYSTAL UNIT(12MHZ)
12 M
20PPM T1
X7301
181447612
QUARTZ CRYSTAL UNIT
32.768 K 20PPM H
X7302
181447111
QUARTZ CRYSTAL UNIT
48 M
20PPM T1
X7302
181448511
QUARTZ CRYSTAL UNIT
48 M
15PPM T1
X8501
181423811
VIBRATOR, CRYSTAL
41 M
20PPM
X8501
181447511
QUARTZ CRYSTAL UNIT
41 M
20PPM T1
TUNER BOARD, COMPLETE
A-2063-363-B
(FOR US/CANADA/LATIN AMERICA/ MEXICO MODELS ONLY)
Component level repair information is not available.
TUNER BOARD, COMPLETE
A-1998-232-C
(FOR BRAZIL/CHILE-PERU/ECUADOR MODELS ONLY)
Component level repair information is not available.
TUNER BOARD, COMPLETE
A-1998-233-C
(FOR COLOMBIA MODELS ONLY)
Component level repair information is not available.
TUS
H
H BOARD, MOUNTED
A-1979-006-A
(FOR ALL MODELS)
Component level repair information is not available.
Chassis: RB2G, HM
Chassis: RB2G, HM
A-1
is a trademark of Sony Electronics
Sony Corporation
Sony LCSC
Technical Services
Service Publication Department
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
1. In the service manual the Circuit Boards containing encryption key components
shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3. Disassembly, decryption, or reverse-engineering components is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
9-883-605-51
English
2012CJ74WEB-1
Printed in USA
© 2015.2
Chassis: RB2G, HM
Chassis: RB2G, HM
A-1
is a trademark of Sony Electronics
Sony Corporation
Sony LCSC
Technical Services
Service Publication Department
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
1. In the service manual the Circuit Boards containing encryption key components
shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3. Disassembly, decryption, or reverse-engineering components is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
9-883-605-51
English
2012CJ74WEB-1
Printed in USA
© 2015.2
Chassis: RB2G, HM
Chassis: RB2G, HM
A-1
is a trademark of Sony Electronics
Sony Corporation
Sony LCSC
Technical Services
Service Publication Department
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
1. In the service manual the Circuit Boards containing encryption key components
shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3. Disassembly, decryption, or reverse-engineering components is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
9-883-605-51
English
2012CJ74WEB-1
Printed in USA
© 2015.2