Read Sony KDL-40VL130 / KDL-52W3000 / KDL-52WL130 / KDL-52WL135 Service Manual online
22
KDL-40VL130/52W3000/52WL130/52WL135
KDL-40VL130/52W3000/52WL130/52WL135
2-3. UPDATING MODEL INFORMATION
AFTER REPLACING THE FB1 BOARD
OR FB3 BOARD
OR FB3 BOARD
Complete the following steps to reset the model information to the
correct size after replacing the FB1 Board or FB3 Board.
correct size after replacing the FB1 Board or FB3 Board.
1. Access the Service Menu by pressing the following buttons on the
Remote Commander within a second:
DISPLAY
Channel
5
Volume
+
TV POWER .
The service menu displays.
2. Press the
JUMP
button until the BEM micro service menu displays.
BEM
SERVICE
BOOT: 0.
026W00AU
MAIN: 0. 050W00AU
DATA: 0. 049A00LUW
3. Press 2 until the 0001 MODEL_INFO category displays.
BEM
SERVICE
0001 PANEL_SIZE
0
0001 MODEL_INFO
DIFF
1
Update
according to
panel size
according to
panel size
4. Do one of the following:
If the model size is 40” Verify the value is set to 0.
If the model size is 52”
Press 3 until the value increases to 2.
5. To write to memory, press MUTING then 0 on the Remote
Commander.
8. To exit service mode, turn the power off.
Click on the first or last page to see other KDL-40VL130 / KDL-52W3000 / KDL-52WL130 / KDL-52WL135 service manuals if exist.