Read Sony KDL-40V4100 / KDL-40V4150 Service Manual online
16
KDL-40V4100/40V4150
KDL-40V4100/40V4150
1 Remove 4 screws from Top Vesa Brackets
2 Remove 5 screws from Top Main Bracket
3 Remove 6 screws from Spine Frames
4 Remove 4 screws from Bottom Vesa Brackets
5 Remove 4 screws from Bottom Frame
1-7. STRUCTURAL FRAMES AND BRACKETS REMOVAL
1-8. LCD
PANEL
REMOVAL
1 Disconnect 2 connectors
2 Remove 2 screws
5
4
Bottom Frame
Vesa (Top)
Spine Frame
Vesa (Bottom)
1
3
2
NOTE: The LVDS cable can only be installed one way. There
is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer
to Wire Dressing Illustration “Installation Procedure”
on Page 33.
is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer
to Wire Dressing Illustration “Installation Procedure”
on Page 33.
LCD Panel
Bezel Assembly
2
1
1-8-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
the power cord to avoid any chance of
electric shock.
electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
☛
Click on the first or last page to see other KDL-40V4100 / KDL-40V4150 service manuals if exist.