Read Sony KDL-40R450A / KDL-46R450A Service Manual online
KDL-40R450A/46R450A 18
SECTION 3 - REPAIR INFORMATION
REMOVING THE BEZEL AND H BOARD ASSEMBLY
1. Remove screws and detach the Power Cord bracket.
2.
Remove 4 screws from Speaker Baffle and 1 screw from Bracket Stand.
3.
Firmly lift up the Speaker Baffle to release from the bottom of the TV. Tilt
upward and place on Rear Cover.
upward and place on Rear Cover.
4.
Remove Harness Assembly from Speaker Baffle to fully release it from
Rear Cover.
Rear Cover.
5. Disconnect H Board connector.
6. Gently turn the TV over and then increase gap between the LCD Panel
and Bezel to detach.
7. Carefully lift up and unhook the Bezel to separate.
CAUTION: To avoid damaging the LCD Panel, use caution when pulling
the Bezel apart from the Double-Sided Tape.
Click on the first or last page to see other KDL-40R450A / KDL-46R450A service manuals if exist.