Read Sony KDL-40NX725 Service Manual online
KDL-40NX725
43
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
251
253
252
PWB (H)
Tape
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
251
4-256-642-02
CENTER CABINET (40 SIR)
252
A-1792-918-A
HLT2 BOARD, MOUNTED
253
NA
LCD PANEL ASSEMBLY (P-MOD )
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
4-256-393-01
SCREW, +PSW M3X6 W12
CENTER CABINET, HLT2 BOARD AND LCD PANEL REMOVAL
CAUTIONS:
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
A
B
PWB (H)
Tape
When replacing the LCD Panel
Assembly refer to
“Special Handling
Instructions When Replacing the
LCD Panel Assembly” on page 4
The HLT2 Board is attached to the
LCD Panel with PWB (H) Tape. Do
NOT damage the HLT2 Board when
removing from the LCD Panel.
A Remove 3 screws from Center
Cabinet to detach from LCD Panel
B Carefully lift-up HLT2 Board to
detach from LCD Panel
Click on the first or last page to see other KDL-40NX725 service manuals if exist.