Read Sony KDL-40NX717 / KDL-46NX717 Service Manual online
KDL-40NX717/46NX717
13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/pART NUMBER INFORMATION
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1
X-2548-371-1
BASE,STAND ASSEMBLY A(ML)
(KDL-40NX717 ONLY)
1
X-2548-476-1
BASE,STAND ASSEMBLY A (L)
(KDL-46NX717 ONLY)
2
X-2549-353-1
NECK (ML) ASSEMBLY
(KDL-40NX717 ONLY)
2
X-2549-352-1
NECK (L) ASSEMBLY
(KDL-46NX717 ONLY)
3
4-256-168-01
HEAD, STAND (ML)
4
3-452-815-01
SCREW, +PSW M5X20
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
3-452-815-01
SCREW, +PSW M5X20
Soft Cloth
C
1
2
4
3
B
A
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
CAUTION: Use care when handling the TV. Correct hand placement while carrying the TV is
very important for safety and to avoid damaging the panel. For more information Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 5
A Remove 3 screws from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
C Gently place the LCD Panel Assembly face down onto a soft cloth
CAUTION: Refer to
“Special Handling Instructions When Replacing the LCD Panel Assembly” on page 5
Click on the first or last page to see other KDL-40NX717 / KDL-46NX717 service manuals if exist.