Read Sony KDL-40NX715 / KDL-46NX715 Service Manual online
KDL-40NX715/46NX715
29
SERVICE ADJUSTMENTS
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press
JUMP or OPTIONS on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID 86d736b1
PID50b20000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
LTK400HF01
Model ID
Product ID
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID
Product ID
Panel ID
KDL-40NX715
86d736b1
50b20000
LTK400HF01
KDL-40NX715
86d736b1
50b20000
LTW400HF01
KDL-46NX715
86d736b2
50b20000
LTW460HJ01
5. Exit Service Mode by pressing HOME or turn the
TV power off.
6. Proceed to “Reconnecting All Cables”.
2-2-7. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
Click on the first or last page to see other KDL-40NX715 / KDL-46NX715 service manuals if exist.