Read Sony KDL-40NX715 / KDL-46NX715 Service Manual online
KDL-40NX715/46NX715
22
SERVICE ADJUSTMENTS
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
DISPLAY
Channel
5
Volume
+
POWER
4. To change the
Category,
press
2
to move to the Next Category or
press
5
to go back to the Previous Category.
Note: Pressing
2
or
5
only changes the Categories within
the Service Menu displayed.
5. To change the
adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the
Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7. Press
MUTING then press
0
to WRITE (Save) the changes.
8. To exit service mode, press HOME or turn the TV power off.
2-2. ADJUSTMENTS AFTER REPLACING THE BUHT BOARD
OR LCD PANEL ASSEMBLY
The following procedures must be completed after replacing the BUHT
Board or the LCD Panel Assembly
þ
Update the TV to the latest software version
þ
Select the Model
þ
Select the Destination
þ
Reset the Data Value in the Panel Engine Micro
þ
Verify the Emitter Output Level
þ
Verify model and panel information are correct
þ
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BUHT Board or the LCD Panel Assembly, you must
update the software to the latest version.
Before you begin
Before you begin
þ
Disconnect all cables (RF, External input, Ethernet, etc.)
from the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to
“Selecting the Model”.
Click on the first or last page to see other KDL-40NX715 / KDL-46NX715 service manuals if exist.