Read Sony KDL-40NX705 / KDL-46NX705 Service Manual online
KDL-40NX705/46NX705
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-2. REAR COVER AND SWITCH UNIT REMOVAL
A Remove screws from Rear Cover
8 from KDL-40NX705 Only
10 from KDL-46NX705 Only
B Remove 1 screw from Terminal position
C Remove 1 screw from Side Jack position
D Remove 4 screws from Under Cover to detach from Bottom Frame
D Remove 4 screws from Under Cover to detach from Bottom Frame
E Slide Vesa Brackets sideways to remover from Rear Cover
F Lift AC Inlet and disconnect 1 connector to remove from Under Cover
G Lift up Switch Unit and disconnect 1 connector to remove from Panel
H Slide out Power Switch and disconnect 1 connector to remove from Switch unit
51
X-2546-727-2
REAR COVER (40) ASSEMBLY
(KDL-40NX705 ONLY)
51
X-2546-730-2
REAR COVER (46) ASSEMBLY
(KDL-46NX705 ONLY)
52
4-170-646-01
COVER, UNDER
53
4-168-272-01
BRACKET, VESA (S)
! 54
1-842-031-11
AC INLET (2P)
55
1-487-804-11
SWITCH UNIT
56
1-798-309-11
POWER SWITCH
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
53
52
51
54
55
56
A
B
E
C
D
F
G
H
Note: The Vesa Brackets are not
included with the Panel and must be
replaced when replacing the Panel
Click on the first or last page to see other KDL-40NX705 / KDL-46NX705 service manuals if exist.