Read Sony KDL-40HX800 / KDL-46HX800 / KDL-55HX800 Service Manual online
KDL-40HX800/46HX800/55HX800
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifi es per un trame et
une marque
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
numero specifi e.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-2. REAR COVER, UNDER COVER, VESA BRACKETS AND SWITCH UNIT REMOVAL
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
51
4-176-752-21
REAR COVER (40)
(KDL-40HX800 ONLY)
51
4-176-753-21
REAR COVER (46)
(KDL-46HX800 ONLY)
52
3-297-324-02
COVER, ECS
!
53
1-842-031-11
AC INLET (2P)
54
4-184-861-01
COVER, UNDER (40)
55
4-167-326-01
BRAKET, VESA (S)
56
1-487-804-11
SWITCH UNIT
57
1-798-309-11
POWER SWITCH
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
J Slide out Power Switch and disconnect 1
connector to remove from Switch Unit
NOTE: The Vesa Brackets are not included with
the Rear Cover and must be reattached to the
replacement Rear Cover
55
53
56
57
54
52
51
A
H
G
F
I
J
B
C
D
E
1-2-1. KDL-40HX800/46HX800 ONLY
A Remove 4 screws from Rear Cover
B Remove 8 screws from Rear Cover (KDL-40HX800 Only)
B Remove 8 screws from Rear Cover (KDL-40HX800 Only)
Remove 10 screws from Rear Cover (KDL-46HX800 Only)
C Remove 1 screw from Rear Cover to detach from Terminal area
D Remove 1 screw from Rear Cover to detach from Side Jack area
D Remove 1 screw from Rear Cover to detach from Side Jack area
E Lift up Rear Cover from bottom side to detach from Bezel
F Disconnect AC Inlet from G4E/G6B (Power) Boards and detach from Under Cover
G Remove 1 screw from Under Cover to detach from Bottom Frame
H Slide out Vesa Brackets to detach from Rear Cover
I Lift up Switch Unit and disconnect 1 connector to remove from LCD Panel
Click on the first or last page to see other KDL-40HX800 / KDL-46HX800 / KDL-55HX800 service manuals if exist.