Read Sony KDL-40HX755 / KDL-46HX755 / KDL-55HX755 Service Manual online
KDL-40HX755/46HX755/55HX755 42
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Press
2
to move to the
002 VCOM category.
VPC
SERVICE
002
000
VCOM
ENABLE 0
6. Enable the
VCOM by pressing
3
to increase the data value to
1.
7. Press
1
to move to the
001 ADJUST item.
VPC
SERVICE
002
001
VCOM
ADJUST 64
8. Change the value of the
001 ADJUST item to adjust the picture by
pressing
3
to increase the data value or
6
to decrease the data
value.
NOTE: When changing the data value, the screen will turn green
for approximately 3 seconds before returning to the service
adjustment screen.
VPC
SERVICE
001
001
VCOM
ADJUST 69
9. When the picture is clear, press
MUTING
then
0
to WRITE
(Save) the changes.
VPC
WRITE
002
001
VCOM
ADJUST 64
10. Do one of the following:
a. If adjustments are complete, exit service mode by turning the
TV power off.
b. Proceed to “Setting White Balance Adjustments”.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
11. Press
2
to move to “006 WB” Category.
VPC
SERVICE
006
000
WB
R_DRV 128
12. To change the data value of the
R_DRV, press
3
to increase the
value or
6
to decrease the value.
NOTE: The data value must be set between the range 1 to 255.
13. Press
1
to move to the next item (
001 G_DRV).
14. To change the data value, press
3
to increase the value or
6
to
decrease the value.
15. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
Click on the first or last page to see other KDL-40HX755 / KDL-46HX755 / KDL-55HX755 service manuals if exist.