Read Sony KDL-40HX750 / KDL-46HX750 / KDL-46HX751 / KDL-55HX750 / KDL-55HX751 Service Manual online
KDL-40HX750/46HX750/46HX751/55HX750/55HX751 42
SECTION 5 - UPDATES AND ADJUSTMENTS
10. Do one of the following:
a. If adjustments are complete, exit
Service Mode by turning
the TV power off.
b. Proceed to
Setting White Balance Adjustments.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the DIGITAL menu.
11. Press
2
to move to
006 WB category.
VPC
SERVICE
006
000
WB
R_DRV 128
12. To change the data value of the
R_DRV, press
3
to increase
the value or
6
to decrease the value.
NOTE: The data value must be set between the range 1 to 255.
13. Press
1
to move to the next item (
001 G_DRV).
14. To change the data value, press
3
to increase the value or
6
to
decrease the value.
15. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
16. To save the changes, press
MUTING
then press
0
.
17. Exit
Service Mode by turning the TV power off.
RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments and Channel
Memory settings to the preset Factory Conditions.
1. Turn the TV On by pressing
POWER
, then wait approximately
40 to 60 seconds.
2. While holding down on the Remote Commander, press the
POWER
button on the side of the TV.
3. The set restarts and displays the Initial Setup screen. This may
take several minutes.
Click on the first or last page to see other KDL-40HX750 / KDL-46HX750 / KDL-46HX751 / KDL-55HX750 / KDL-55HX751 service manuals if exist.