Read Sony KDL-40EX725 Service Manual online
KDL-40EX725 58
SECTION 7 - SERVICE ADJUSTMENTS
26. Using the information provided in the Segment Code
table below, verify the Model ID and Product ID are
correct.
Model Name
LCD Panel Code
Model ID
Product ID
KDL-40EX725 LTU400HF0301 3D65E21F 0F050000
KDL-40EX725 T400HW04 V1 3D65E220 0F050000
KDL-40EX725 LTY400HF0901 3D65E21F 0F050000
KDL-40EX725 T400HW05 V1 3D65E220 0F050000
KDL-40EX725 V400HK2-LE1 3D65E261 0F050000
KDL-40EX725 LTY400HF0902 3D65E21F 0F050000
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E21F
PM1.012W00LU
PID:0F050000
PB1.000W00LU
PNL:LTU400HF0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
Model ID
Software Version
Panel ID
Product ID
27. Exit service mode by pressing
HOME
and then turn the
TV power off.
28. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
29. Wait a minute while lights flash, and initial setup screen
shows.
30. TV update is complete.
The additional features of the TV are now available.
UPDATING SERVICE ADJUSTMENT DATA
WHEN REPLACING THE LCD PANEL
Before proceeding, update the software to the latest version. After
updating the software, go into Service Mode to make the appropriate
adjustments to the copy the data onto the panel.
● Copy the BU Flash Data
● Confirm Model ID and Product ID
● Reset the Panel Operation Time
COPYING THE BU FLASH DATA
This procedure is to copy the White Balance adjustment data from
the TCON Board to the Main Board. The BU Flash service item is
under the VPC service menu.
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel
5
Volume
+
POWER
Click on the first or last page to see other KDL-40EX725 service manuals if exist.