Read Sony KDL-40EX645 / KDL-46EX641 / KDL-46EX645 / KDL-50EX645 / KDL-55EX645 Service Manual online
KDL-40EX645/46EX641/46EX645/50EX645/55EX645 38
SECTION 5 - UPDATES AND ADJUSTMENTS
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL
The following must be performed after replacing the LCD Panel.
;
View the Status Information
;
Verify the Panel ID Code
;
Reset the Panel Operation Time
1. TV must be in Standby mode.
2. Press the following buttons on the
2. Press the following buttons on the
Remote Commander
within a second of each other:
DISPLAY
Channel 5
Volume +
POWER
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
25
]>
DPMS
<[
Off
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
]>
9_500HK1
UART Selection
No Log
SERIAL NUMBER EDIT
5000004
MODEL NAME EDIT
KDL-50EX645
[</>]Set [Home] Exit
Service Mode
VIEWING THE STATUS INFORMATION
After replacing the LCD Panel you MUST UPDATE the SOFTWARE to the
latest version. Verify the latest software is installed before proceeding to the
service adjustments.
Whenever the LCD Panel is replaced, the software must be updated so that
Whenever the LCD Panel is replaced, the software must be updated so that
the new board syncs with the LCD Panel. If a message displays indicating
the latest software is already installed, proceed to Resetting the LCD Panel
to Update the Software.
3. For instructions refer to the section
“Viewing the Status
Information” on page 33.
4. Do one of the following:
a. If the latest software is installed, proceed to
Verifying
the Panel ID Code.
b. If the latest software is not installed, update the software
and then proceed to
Verifying the Panel ID Code.
VERIFYING THE PANEL ID CODE
5. Press to select
Panel Selection.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
25
]>
DPMS
<[
Off
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
]>
9_500HK1
UART Selection
No Log
SERIAL NUMBER EDIT
5000004
MODEL NAME EDIT
KDL-50EX645
[</>]Set [Home] Exit
Service Mode
Click on the first or last page to see other KDL-40EX645 / KDL-46EX641 / KDL-46EX645 / KDL-50EX645 / KDL-55EX645 service manuals if exist.