Read Sony KDL-40EX1 / KDL-46EX1 / KDL-52EX1 Service Manual online
KDL-40/46/52EX1 (AUS/NZ) 1-6
1-2. LDM-E521 (MONITOR)
1-2-1. REAR COVER REMOVAL
Remove the rear cover fixing screws indicated and pull the rear
cover gently backwards away from the back of the TV set.
cover gently backwards away from the back of the TV set.
Screw part number(s) and description(s)
: 2-580-640-01 SCREW, +BVTP2 4X16
: 2-580-593-01 SCREW, +PSW M3X8
: 2-580-593-01 SCREW, +PSW M3X8
1-2-2. STAND REMOVAL
Remove the 4 stand fixing screws ( ) and lift the monitor away
from the stand to disengage support screws ( ).
from the stand to disengage support screws ( ).
Screw part number(s) and description(s)
: 4-119-044-01 +PSW6 (W) STAND
: 4-119-045-01 +RKMS6 (W) STAND
: 4-119-045-01 +RKMS6 (W) STAND
1-2-3. UNDER COVER REMOVAL
To the under cover first remove the stand and stand support
screws. Remove the 3 screws circled ( ).
The under cover can then be gently turned over to gain access to
the H4P board.
The H4P board is fixed to the under cover by one screw circled
( ) abobe.
screws. Remove the 3 screws circled ( ).
The under cover can then be gently turned over to gain access to
the H4P board.
The H4P board is fixed to the under cover by one screw circled
( ) abobe.
Screw part number(s) and description(s)
: 2-580-640-01 SCREW, +BVTP2 4X16
: 7-685-646-79 SCREW, +BVTP 3X8
: 7-685-646-79 SCREW, +BVTP 3X8
1-2-4. POWER UNIT (G4) REMOVAL
Remove the 6 screws circled.
Gently pull the power unit (G4 board) away from the TV set.
Gently pull the power unit (G4 board) away from the TV set.
Screw part number(s) and description(s)
: 2-580-593-01 SCREW, +PSW M3X8
[ UNDER COVER ]
[ H4P BOARD ]
Click on the first or last page to see other KDL-40EX1 / KDL-46EX1 / KDL-52EX1 service manuals if exist.