KDL-40BX450, KDL-40BX451, KDL-46BX450, KDL-46BX451 - Sony TV Service Manual (repair manual). Page 16

Read Sony KDL-40BX450 / KDL-40BX451 / KDL-46BX450 / KDL-46BX451 Service Manual online

KDL-40BX450/40BX451/46BX450/46BX451 8
SECTION 2 - TROUBLESHOOTING
6X Blink - Backlight Inverter System Failure
If the inverter circuits fails to generate high voltage or one or more of the 
backlight lamps fails to light, the television will shut down and display this 
diagnostics error. Observing for the presence of backlighting is crucial in 
determining which component is likely at fault.
If the backlights turn on before the 6X shutdown occurs, it is safe to assume 
that the inverter circuits are functioning and one of the lamps failed to ignite. 
Replacing the LCD Panel assembly is necessary. If the backlights never 
turn on before the 6X shutdown, the Inverter MT Board has failed. If this 
board is available for replacement, replace it, if not, replace the LCD Panel 
Assembly.
7X Blink - Temperature Failure
A digital thermometer IC located on the Main Board provides a temperature 
reading of the chassis and LCD panel. If the temperature exceeds a pre-
determined point the TV will shut down. If this problem occurs immediately 
at turn-on, the temperature sensing IC has failed and replacing the main 
board is required. If this occurs after the TV has been running for a while, 
check for ventilation issues that could cause the TV to run hotter than 
normal.
TRIAGE CHART
Use this general Triage Chart to determine what may possibly be causing the error before going out to the customers location. 
1.  Confirm the symptom from the customer.
    RED DOT: (Primary) Most likely defective part. 
2.  Select that symptom from the chart.
    BLUE Triangle: (Secondary) Possible defective part.
3.  Bring the primary component listed for that symptom.
5.  Chart Color Code.
Power
Audio
2X     3X    5X     6X    7X   
Dead set
No 
Video             
Whole 
Screen 
Distortion
Isolated 
Area 
Distortion                            
No Audio          
Main Board
*
 
Power Supply
***
H Board
Inverter
▲*
LCD Panel
**
TCON
▲* Secondary Component
4.  Follow the associated flowcharts in the Training Manual to isolate the board.
Board 
* TV Immediate Shuts Off After Power ON & 7X
*NOTE: REFER TO LCD PANEL SERVICE 
MANUAL IN REFERENCE LIBRARY DATABASE 
FOR CORRECT REPLACEMENT PARTS BASED 
ON SERIAL NUMBER.
**Backlight Turns ON before TV Shuts Off
***Backlight Does NOT Turn ON before TV Shuts
Video                  
Protection Modes
To access the most recent version of the Triage documents for the models listed in this manual, login into the Sony Authorized Servicer Portal at 
 
http://www.sony.com/asp
.
Page of 42
Display

Click on the first or last page to see other KDL-40BX450 / KDL-40BX451 / KDL-46BX450 / KDL-46BX451 service manuals if exist.