Read Sony KDL-32R305C / KDL-32R309C / KDL-40R355C / KDL-40R359C Service Manual online
10
SERVICE POSITION
2. Remove all screws on the Rear Cover to
Bezel & Main Board & Bracket (13 screws)
Bezel & Main Board & Bracket (13 screws)
1.
Remove all screws on the Stand
to main unit (4 screws)
3. After removing rear cover , lie down the main unit
to a surface for following test/repair.
to a surface for following test/repair.
2-580-603-01 SCREW, +PSW M4X16
2-345-219-11 SCREW , 3X6
7-682-903-19 SCREW , M3X6
7-685-660-79
2-345-219-11 SCREW , 3X6
7-682-903-19 SCREW , M3X6
7-685-660-79
SCREW, Q4X10
As for this model, the bottom of rear cover is installed between the stand assy and the panel.
Therefore according to the following procedure when performing adjustment and operation check after the part replacement.
Therefore according to the following procedure when performing adjustment and operation check after the part replacement.
Note: Remove rear cover, then assemble the stand to main unit. This
will cause the stand with main unit fit closely, scratch or deformation
may occurred easily on the stand or bezel deco.
will cause the stand with main unit fit closely, scratch or deformation
may occurred easily on the stand or bezel deco.
Attention:
This photo is based on Sony criteria for appearing standing the
main unit after removing back cover and assembling the stand. But
considering mechanical design of MB2 models and normal service process,
it is not recommended to keep main unit standing by this status for
repairing/testing at repair center.
Please pay attention for avoiding
possible scratch/deformation occurred.
<KDL-32R309C>
KDL-32R305C /40R355C LA8 /KDL-32R309C / 40R359C ECU / KDL-32R305C / 40R355C CR1
Click on the first or last page to see other KDL-32R305C / KDL-32R309C / KDL-40R355C / KDL-40R359C service manuals if exist.