Read Sony KDL-32P5650 / KDL-32S5600 / KDL-32S5650 / KDL-37P5650 / KDL-37S5600 / KDL-37S5650 / KDL-40P5650 / KDL-40S5600 / KDL-40S5650 Service Manual online
SERVICE MANUAL
B Board Schematic Diagram ........................... 18
H1 Board Schematic Diagram ........................... 30
IP1F Board Schematic Diagram (40 inches) ..... 31
B Printed Wiring Board ....................................... 33
H1 Printed Wiring Board ..................................... 34
IP1F Printed Wiring Board (40 inches) ............... 35
FOR SAFE OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN
THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD DUE TO
LIVE CHASSIS, THE CHASSIS OF THIS RECEIVER IS DIRECTLY
CONNECTED TO THE POWER LINE.
Lead Free Solder. The boards are identified by the LF logo located
close to the board designation e.g. H1 etc [ see example ]. The
servicing of these boards requires special precautions to be taken as
outlined below.
under the following part numbers :
requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
plug having a fuse of the correct rating for the set. Should the fuse
need to be replaced, use a fuse of the same rating approved by ASTA
to BS 1362, ie one that carries the
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE SOCKET.
correct rating fuse, otherwise the circuit should be protected by the
same rating fuse at the distribution board.
If it is necessary to power up the TV set when face down, the time should be minimised as much as possible.