Read Sony KDL-32L504 Service Manual online
19
KDL-32L504
KDL-32L504
SECTION 2: SERVICE ADJUSTMENTS
2-1. ACCESSING SERVICE MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
TOOLS
WIDE
INPUT
CC
DISPLAY
POWER
POWER
Onscreen cursor
and select button
and select button
DISPLAY
RM-YD028
5
VOLUME+
JUMP
To select Service Mode item, use the Up and Down feature of the
joystick on the remote or the volume and channel buttons on the top
of the television.
joystick on the remote or the volume and channel buttons on the top
of the television.
2-2. RESETTING TO FACTORY DEFAULTS
Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander, press the
POWER button on the right side of the set.
The set restarts and displays the initial setup screen. This may take
several minutes.
several minutes.
Note: Additonal information regarding the Self-Diagnostic function,
will be reviewed in the Training Manual for this model.
SOUND ADJUST
>>
WIDE BAND TUNING
>>
RANGE SCAN
>>
>>
STATUS INFORMATION
>>
LVDS SPECTRUM (%)
< [ 25 ] >
DPMS
<
[
OFF
]
>
LOW OF HPD
< [ 5 ] >
TVD_MCDONE_CNT
< [ 20 ] >
DEMO SPECIAL
>>
BY PASS AVI INFO DEFECT < [ ON ] >
PANEL SELECT
PANEL SELECT
< [ 22C1 (818XX) ] >
SERVICE MODE
[</>] Set [MENU] EXIT
SELF DIAGNOSTIC HISTORY
Click on the first or last page to see other KDL-32L504 service manuals if exist.