Read Sony KDL-32HX755 / KDL-40HX755 / KDL-46HX755 / KDL-55HX755 Service Manual online
KDL-32HX755/40HX755/46HX755/55HX755 41
SECTION 5 - UPDATES AND ADJUSTMENTS
10. Do one of the following:
a. If adjustments are complete, exit service mode by turning the
TV power off.
b. Proceed to “Setting White Balance Adjustments”.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
11. Press
2
to move to 006 WB” Category.
VPC
SERVICE
006
000
WB
R_DRV 128
12. To change the data value of the
R_DRV, press
3
to increase the
value or
6
to decrease the value.
NOTE: The data value must be set between the range 1 to 255.
13. Press
1
to move to the next item (
001 G_DRV).
14. To change the data value, press
3
to increase the value or
6
to
decrease the value.
15. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
16. To save the changes, press
MUTING
then press
0
.
17. Exit service mode by turning the TV power off.
RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments and Channel
Memory settings to the preset factory conditions.
1. Turn the TV On by pressing
POWER
, then wait approximately
seconds.
2. While holding down the on the Remote Commander, press the
POWER
button on the side of the TV.
3. The set restarts and displays the Initial Setup screen. This may
take several minutes.
RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER
4. If necessary, press
JUMP
or
OPTIONS
to go to DIGITAL menu.
Click on the first or last page to see other KDL-32HX755 / KDL-40HX755 / KDL-46HX755 / KDL-55HX755 service manuals if exist.