Read Sony KDL-32FA600 Service Manual online
KDL-32FA600
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifi es per un trame et
une marque
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
numero specifi e.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-3. A BOARD, SIDE JACK BRACKET, KD BOARD, G2HE (POWER) BOARD, SWITCH UNIT, LCD
PANEL, H BOARD AND BEZEL ASSEMBLY REMOVAL
A
Remove 4 screws from Power G2HE (Power) Board to detach from Panel
B
Disconnect 3 connectors from G2HE (Power) Board
C
Remove 2 PWB Spacers from G2HE (Power) Board
D
Remove 3 screws from KD Board to detach from Panel
E
Disconnect 3 connectors from KD Board
F
Remove 1 screw from KD Bracket to detach from Bezel Assembly
G
Remove 4 screws from A Board to detach from Panel
H
Disconnect 7 connectors from A Board
I
Remove 1 PWB Holder to detach A Board from Panel
J
Slide Side Jack Bracket to right-side of A Board to remove
K
Disconnect 1 connector from H Board and release from LED Guide
L
Slide-out 2 Panel Supports to detach from Bezel Assembly
M
Lift up Switch Unit and disconnect 1 connector to remove from Bezel Assembly
N
Lift up Panel to remove from Bezel
NOTE: The KD Radiation Sheets are not included with the KD Board and
must be replaced when replacing the KD Board. The KD Bracket is
not included with the Panel and must be replaced when replacing the
Panel. The PWB Spacers and PWB Holders are not included with the
Boards and must be replaced when replacing the Boards.
must be replaced when replacing the KD Board. The KD Bracket is
not included with the Panel and must be replaced when replacing the
Panel. The PWB Spacers and PWB Holders are not included with the
Boards and must be replaced when replacing the Boards.
A
D
E
G
H
J
I
M
L
K
N
F
B
C
PWB
Spacers
Spacers
PWB
Holder
Holder
KD Sheets,
Radiation
Radiation
109
108
107
106
103
101
102
105
104
110
101
X-2547-014-1 BEZEL
(32TM)
ASSEMBLY
102
N/A
PANEL SUPPORT
FOR ALL PANEL SUPPORT PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
103
1-487-889-11 SWITCH
UNIT
104
N/A
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
105
1-857-594-11
H2 BOARD, MOUNTED
106
4-163-796-01
BRACKET, SIDE JACK
107
1-857-593-41
A BOARD, COMPLETE
108
4-182-486-01
SHEET RADIATION(KD)
MUST BE REPLACED WHEN REPLACING THE KD BOARD
109
1-857-617-11
KD BOARD, COMPLETE
110
1-474-202-11
G2HE (POWER) BOARD, COMPLETE
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
2-580-592-01
SCREW, +PSW M3X8
Click on the first or last page to see other KDL-32FA600 service manuals if exist.