Read Sony KDL-32EX727 / KDL-40EX727 / KDL-46EX727 / KDL-55EX727 Service Manual online
KDL-32EX727/40EX727/46EX727/55EX727
C-1
APPENDIX C - REPLACING THE LCD PANEL
REMOVING THE LCD PANEL FROM THE
BEZEL
The LCD Panel is adhered to the Bezel using double sided tape.
When replacing the panel, you should also replace the tape.
Caution: These instructions should be followed whenever
separating the LCD Panel from the Bezel.
1. Using the instructions provided in
“Rear Cover and AC
Cover Removal” on page 57
, remove the rear cover, all of
the boards, and connectors.
CAUTION: To avoid damaging the panel and bezel,
always lay the TV with the bezel face down on the cloth
to pull the panel off of the bezel. Placing the panel face
down on the cloth and attempting to pull the bezel off of
the panel may cause damage to the panel.
2. Remove the Panel Brackets.
NOTE: A flat head screw driver can be used to remove
the brackets.
Panel Bracket
3. Remove the HMS3 Board and the HLR2 Board.
NOTE: The LED Bracket is part of the bezel assembly.
Click on the first or last page to see other KDL-32EX727 / KDL-40EX727 / KDL-46EX727 / KDL-55EX727 service manuals if exist.