Read Sony KDL-32EX650 / KDL-32EX651 / KDL-40EX650 / KDL-40EX651 / KDL-46EX650 / KDL-46EX651 Service Manual online
KDL-32EX650/32EX651/40EX650/40EX651/46EX650/46EX651 16
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
TABLE-TOP STAND REMOVAL
A Remove 3 screws from the Table-Top Stand, then lift up the LCD TV and gently place it face down onto a soft cloth.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1
4-300-958-02
STAND, HEAD P(M)
(KDL-32EX650/32EX651 ONLY)
1
4-300-964-02
STAND, HEAD P(ML)
(KDL-40EX650/40EX651/46EX650/46EX651 ONLY)
2
4-400-036-01
STAND, PIPE (M)
(KDL-32EX650/32EX651 ONLY)
2
4-400-041-01
STAND, PIPE (ML)
(KDL-40EX650/40EX651/46EX650/46EX651 ONLY)
▲
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH STAND HEAD TO STAND PIPE)
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the
Wall Mount Brackets.
1
2
Soft Cloth
A
Click on the first or last page to see other KDL-32EX650 / KDL-32EX651 / KDL-40EX650 / KDL-40EX651 / KDL-46EX650 / KDL-46EX651 service manuals if exist.