KDL-32EX650, KDL-32EX651, KDL-40EX650, KDL-40EX651, KDL-46EX650, KDL-46EX651 - Sony TV Service Manual (repair manual). Page 13

Read Sony KDL-32EX650 / KDL-32EX651 / KDL-40EX650 / KDL-40EX651 / KDL-46EX650 / KDL-46EX651 Service Manual online

KDL-32EX650/32EX651/40EX650/40EX651/46EX650/46EX651 4
SECTION 1 - FEATURES AND OVERVIEW
OVERALL CIRCUIT DESCRIPTION
“Block  Diagram”  on  page  10
  provides  an  overview  of  the  AZ3F 
chassis. The following are descriptions of the boards and their functions.
MAIN BOARD
Common to all models the Main Board, designated as the BAPS Board, 
contains the TV control, video, and audio processing circuitry. All these 
functions are accomplished using the X-Reality Processor IC9000. 
TUNER
The tuner is a combination ATSC/NTSC unit. It can receive traditional 
analog NTSC signals via cable or terrestrial along with ATSC digital 
signals via terrestrial (8VSB) or cable (64 or 256 QAM).
X-REALITY PROCESSOR
IC9000  performs  the  majority  of  the  necessary  audio  and  video 
processing on the Main Board.
TV Microprocessor: The  CPU  internal  to  the  X-Reality  processor 
controls  all  aspects  of  the  television  functions.  Input  from  the  user 
along with monitoring of critical circuits is also performed by this CPU. 
Digital Audio and Video Decoder: The  MPEG2  and  Digital  Dolby 
audio streams are received from the tuner for decompression. All video 
sources which are not native 1920 X 1080p 60HZ are scaled to this 
resolution. Digital audio content is output to the class D amplifier for 
processing and amplification.
HDMI Input and Switching:  The  customer  can  select  the  HDMI1, 
HDMI2, HDMI3, HDMI4 input via the HDMI switch IC5500. Each HDMI 
input  contains  a  common  EDI  NVM  (internal  to  IC5500)  to  provide 
display information data to any device connected via the HDMI inputs.
LVDS Transmitter: Integrated into IC9000 is a Low Voltage Differential 
Signaling  (LVDS)  transmitter.  This  circuit  converts  the  8-bit  parallel 
RGB video information into a set of high speed serial lines for noise-
free transmission to the TCON Board circuits located internally to the 
LCD Panel.
Scan Converter:  Signal  processing  circuit  that  performs  resolution 
conversion  (aspect  ratio)  and  interlaced  to  progressive  scan  (IP) 
conversion.
AUDIO AMPLIFIER
The  main  speaker  audio  amplifier  (IC4601)  and  sub-woofer  amplifier 
(IC4701) amplifies the digital audio output of the X-Reality processor and 
sends it to the speakers.
TEMPERATURE SENSOR
The temperature sensor detects over-temperature conditions on the Main 
Board, LCD Panel, or ambient room temperature and sends the shutdown 
signal to the processor.
POWER SUPPLY BOARD
There  are  different  Power  Supply  Boards  used  in  the  models  in  this 
manual. The type of board depends on the size of LCD panel. They are:
 
GL2 Board (for 32” models)
 
GL4 Board (for 40” and 46” models)
There are 3 distinct sections on the power supply:
Standby Supply: Continuously  operational  as  long  as  AC  power  is 
applied, the standby supply generates 3.3V for the circuits requiring power 
while the unit is turned off. An unregulated 19V line is present to provide 
power to the main relay, PFC and main power supply at turn-on.
Main Supply: Once  the  power  supply  receives  a  power-on  command 
from the CPU on the Main Board, the main switching supply is turned on 
to provide a regulated 12V source and Audio 12V.
Converter: Generates the B+ and B- voltages for the LED backlights.
IR BOARD
Designated as the HL Board, the IR Board contains the power, standby, 
and timer LED’s that are located on this board along with the IR remote 
receiver and light level sensor.
Page of 51
Display

Click on the first or last page to see other KDL-32EX650 / KDL-32EX651 / KDL-40EX650 / KDL-40EX651 / KDL-46EX650 / KDL-46EX651 service manuals if exist.