Read Sony KDL-32EX550 Service Manual online
KDL-32EX550 35
SECTION 5 - UPDATES AND ADJUSTMENTS
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that the
correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
3. Press
JUMP
or
OPTIONS
on the Remote Commander until
the
DIGITAL menu displays.
4. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:1C23A122
-------------------
PID:03047040
-------------------
PNL:LTY320AN0301
TUNER: ENABLE
-------------------
-------------------
5. Using the information provided in the table below, verify the Model
ID and Product ID are correct.
Model Name Destination
Panel Name
Model‐ID
Product‐ID
KDL‐32EX550
LA/MX
LTY320AN0301 1C23A122
03047040
KDL‐32EX550
LA/MX
LTY320AN0501 1C23A12F
03047040
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
-------------------
PID:03047040
-------------------
PNL:LTY320AN0301
TUNER: ENABLE
-------------------
-------------------
Model ID
Software Version
Panel ID
Product ID
MID:1C23A122
6. Exit service mode by turning the TV power off.
7. Cycle AC Power.
7. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
8. Wait a minute while lights flash, and initial setup screen shows.
9. Proceed to “
9. Proceed to “
Resetting the Panel Operation Time
”.
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the Self
Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Confirmed Model ID and Product ID
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
Click on the first or last page to see other KDL-32EX550 service manuals if exist.