Read Sony KDL-32EX407 / KDL-40EX407 Service Manual online
KDL-32EX407/40EX407
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
A
Slide Side Jack Bracket to right side of BAL Board to detach from position
B
Remove 4 screws from BAL Board
C
Disconnect 5 connectors from BAL Board
D
Remove 1 PWB Holder to detach BAL Board from LCD Panel
E
Remove 2 screws from Bottom Frame to detach from Bezel Assembly (KDL-40EX407 ONLY)
F
Remove 2 screws from Bottom Frame to detach from LCD Panel
G
Remove 4 screws from G2LE/G2HE (Power) Boards
H
Disconnect 4 connectors from G2LE/G2HE (Power) Boards
I
Lift up Switch Unit and disconnect 1 connector to remove from Bezel
J
Press down on Panel Support
K
Slide out Panel Support to remove from Bezel Assembly
L
Carefully Lift up Panel to remove from Bezel Assembly
M
Disconnect 1 connector from HLR Board and release clips,
then lift up to detach from position
then lift up to detach from position
NOTE: The Mini Card Spacers and PWB Holder are not included
with the Boards and must be replaced when replacing the Boards.
with the Boards and must be replaced when replacing the Boards.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-3. BOTTOM FRAME, SWITCH UNIT, G2LE/G2HE (POWER) BOARDS, PANEL SUPPORTS,
BAL BOARD, SIDE JACK BRACKET, LCD PANEL AND HLR BOARD REMOVAL
101
4-166-126-11
SUPPORT, PANEL
(KDL-32EX407
ONLY)
101
4-166-126-01
SUPPORT, PANEL
(KDL-40EX407
ONLY)
102
X-2547-547-1
BEZEL ASSEMBLY (CY32 DS)
(KDL-32EX407
ONLY)
102
X-2547-548-1
BEZEL ASSEMBLY (CY40 DS)
(KDL-40EX407
ONLY)
103
A-1753-637-A
HLR BOARD, MOUNTED
104
N/A
LCD PANEL
FOR ALL SUPPORT, PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
105
4-175-711-01
BRACKET, SIDE JACK
106
A-1769-679-A
BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section 2-4. Adjustments after
Replacing the BAL Board.
NOTE: Final software is not installed on this BAL Board. Install the update after replacing
this board using the instructions provided with the software.
107
1-474-200-11
G2LE (POWER) BOARD, COMPLETE
(KDL-32EX407
ONLY)
107
1-474-202-21
G2HE (POWER) BOARD, COMPLETE
(KDL-40EX407
ONLY)
108
1-487-725-11
SWITCH UNIT
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
M
L
B
C
D
F
G
Mini Card
Spacer
H
J
K
I
A
E
103
104
102
106
107
108
105
101
Click on the first or last page to see other KDL-32EX407 / KDL-40EX407 service manuals if exist.